Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Ishijima, Yasuhiro; Ueno, Fumiyoshi
Proceedings of 23rd International Conference on Nuclear Engineering (ICONE-23) (DVD-ROM), 4 Pages, 2015/05
In this study, to evaluate the effect of thermal aging on creep properties of Alloy 625, we carried out creep tests on aged and solution-treated Alloy 625 at 1073 K. According to the creep test results, time-to-rupture decreased by thermal aging when test stress was more than 100 MPa, but did not change when test stress was less than 100 MPa for any specimens. In the solution-treated alloy, creep deformation behaviors changed over 100 MPa. These results show that time-to-rupture was constant because intermetallic compounds precipitated when the test stress was less than 100 MPa in solution-treated alloy. The observed relationship between creep strain rate and test time showed that the precipitation started after 100 hr for solution treated alloys. These results suggest that intermetallic compounds precipitate immediately after furnace operation. And it is appropriate to use creep data of thermal-aged Alloy 625 for the reducing roasting furnace lifetime prediction.
Mizuta, Shunji; ;
JNC TN9400 99-082, 60 Pages, 1999/10
The density measurement of the internal creep specimens irradiated in FFTF/MOTA (Fast Flux Test Facility / Material open Test Assembly) was conducted MMF (Materia1 Monitoring Facility) and accurate separation of swelling strain from total strain leaded in the derivation of the irradiation creep coefficients. Irradiation creep coefficients for PNC 316, 15Cr-20Ni base S.S. and 14Cr-25Ni base S.S. were systematically expressed, while thermal creep coefficients K, under irradiation were separately expressed for above three steels. The results obtained are follows, (1)The effect of stress induced swelling was recognized in the temperature range from 405 to 605C. The swelling in high stress specimens have a tendency to increasing swelling. (2)The irradiation creep coefficients derived from PNC316 and l5Cr-20Ni are similar to that of derived from 20%CW316S.S., CW316Ti and CW15-15Ti which were reported by other authors. (3)The irradiation creep coefficient derived from gas pressurized tube irradiation using FFTF/MOTA expressed appropriately irradiation creep strain from fuel pins using FFTF/MFA-2(15Cr-2ONi base S.S.).
Tachibana, Katsumi; Nishi, Hiroshi; Eto, Motokuni;
JAERI-Tech 99-024, 65 Pages, 1999/03
no abstracts in English
Tachibana, Katsumi; Nishi, Hiroshi; Eto, Motokuni;
JAERI-Tech 98-010, 107 Pages, 1998/03
no abstracts in English
Kimura, Hidetaka; *; *; Kawasaki, Hirotsugu; Aoto, Kazumi;
PNC TN9450 91-003, 28 Pages, 1991/03
None
; ;
Journal of Nuclear Materials, 152, p.225 - 234, 1988/00
Times Cited Count:9 Percentile:67.94(Materials Science, Multidisciplinary)no abstracts in English
;
Nihon Kikai Gakkai Rombunshu, A, 49(439), p.293 - 303, 1983/00
no abstracts in English